TECHNOPLAT CS 707 PVS
The automatic Technoplat machines represent the innovative and flexible solution to fully automatic pallet wrapping. The operator places the load on the turntable, stars -off cycle by remote con trol and, after having accomplished the wrapping cycle in an automatic manner, removes the pallet. The innovative Film Clamping & Cutting Unit with integrated spread ensures accurate hooking; full respect of the safety rules is guaranteed in every operating condition.
The pallet can be positioned by fork lift truck or pallet jack and, thanks to the base plate 92 mm. high, Technoplat has a high operating flexibility.
The innovative clamp and cut unit is based on a pneumatic system and delivers high precision and reliable performances by executing each operation step by step. The integrated spreading unit on the CS machines is able to spread the film at the end of each wrapping cycle and ensures the absence of any tail. The clamp unit allows the machine to be always ready for the next cycle. All these operations can run manually.
The control panel is equipped with a practical alert system that detects and locate where maintenance/action might be needed.
D= CARRIAGE DESCENT
E= PRESSURE UP/DOWN
F= CARRIAGE STOP
Table rotation speed
Carriage up/down speed
Film tension upward/downward
Bottom wrap and top wrap
Top sheet cycle
4 programs with parameters defined by the operator
Independent dual-drive pre-stretch roller carriage with pre-stretch ratio adjustment from 0 – 400%. Film deposit force onto the load can be adjusted on the panel and controlled by patented electronic device. “QLS” (quick load system) for fast film loading.
The CS is equipped with a remote control unit that allows the operator to start the wrapping cycle without getting of the forklift.